Magnetic Impurity Separator Flamco Clean Smart EcoPlus 1

Application: in closed heating and cooling systems.

Contaminant Separators protect boilers, pumps, and equipment from damage caused by the deposition of contaminant particles. Contaminant Separators also offer benefits when applied in older installations or when transitioning from an open system to a closed system.

Smart Contaminant Separators effectively remove even the tiniest microbubbles and particulate contaminants from the water within the installation. They are nearly maintenance-free, and their flow resistance is negligibly low.

60% higher efficiency compared to conventional air and contaminant separators.
Flow velocity of up to 3 m/s.
Four neodymium super magnets are integrated with the logo on the exterior.
Applicable to all types of piping.
Compact dimensions and lightweight design.
Minimal flow resistance and low energy losses.
Consistent performance throughout the operational period.
Enhances comfort and efficiency.
Prevents the deposition of contaminant particles in the boiler.
Removes air and contaminants from installation water, extending the lifespan of pumps, heat exchangers, and other installation equipment.

Material	Plastic
Separator Type	Contaminants
Model	Horizontal/Vertical
Connection Material	Brass
Connection Material Grade	Other
Housing Material	Other
Housing Material Grade	Other
Reversible Flow	No
For Heating Installations	Yes
For Cooling Installations	Yes
For Solar Installations	No
Nominal Inner Diameter	1 inch (25 mm)
Outer Pipe Diameter	33.7 mm
Connection Type	Threaded cylindrical internal gas (BSPP)
Principle of Operation	Other
Installation Length	106 mm
Device Pressure Class	PN 10
With Drain Valve	Yes
Surface Protection	Raw state
Cyclone Filter Separation Principle	No
Vacuum Filter Separation Principle	No
Magnetic Filter Separation Principle	Yes
Gravity Force Filter Separation Principle	Yes
Partial Flow Principle	Yes
Full Flow with Settling Principle	No
Maximum Continuous Medium Temperature	120°C
Cleaning During Operation	No
Magnet Location	External
Flow Range	0 - 6.56 m³/h
For Open Systems	No
For Closed Systems	Yes
Maximum Operating Pressure	10 Bar
Outlet Valve	Yes
With Removable Filter	No
Filter Efficiency	0 L
Filter Mesh Density	0 mm
Backflush Filter	No
Min. Backflush Pressure	0 Bar
With Automatic Air Vent	No
With Connections	No
Inlet/Outlet Offset Distance	0 mm
Medium Temperature Range	0 - 120°C
Max Operating Pressure	10 Bar
Kvs Value	0
With Insulation	Yes
Thermal Conductivity of Insulation Material (ʎ)	0 Watt per meter Kelvin
Max Glycol Mixture	50%
With Integrated Supplement Device	No