The KVS MORAVIA type 9112-V Klaudie kitchen stove with a water heat exchanger combines the advantages of a cooking and baking appliance with those of a central heating boiler. The spacious firebox allows the use of logs up to 450 mm in length and up to 190 mm in diameter. One of the many advantages of this model is the option of flexible chimney connection.

Functionality and heating

The stove has been designed not only for cooking and baking but also for efficient space heating. The model with a water heat exchanger requires more user attention than versions without a heat exchanger, including more frequent refuelling and grate cleaning. The stove is not designed for continuous operation. The appliance is suitable for heating smaller apartments and holiday cottages.

Large firebox and smaller oven

The stove features a larger firebox at the expense of oven size, which is smaller compared to models 9100 and 9103. Despite its smaller dimensions, the oven is fully functional and equipped with a rack and baking tray. The large firebox door allows logs up to 190 mm in diameter and 450 mm in length. Therefore, this model is ideal when heating is the priority rather than cooking or baking.

Water heat exchanger and connection to the heating system

The L-shaped water heat exchanger is located at the rear and sides of the firebox (instead of fireclay bricks). Connections to the central heating system are located at the rear of the appliance. Due to limited construction space, the water heat exchanger has smaller dimensions and lower water capacity. Therefore, connection to a forced circulation system (with a pump) is recommended.

Key features

• High heating output
• Modern rustic-style design
• Spacious firebox for wood logs up to 450 mm long
• Heat exchanger integrated into the firebox for excellent functionality
• Glazed firebox door for fuel consumption control
• Oven suitable for baking
• Glazed oven door with built-in thermometer
• Chimney connection possible from the rear, side, or top (from the cooktop)
• Convenient flue gas and power regulation
• Large fuel storage drawer
• Available in left-hand and right-hand versions

Flexible chimney connection

The stove is equipped as standard with three flue gas outlets, which can be connected to the chimney from the rear, side, or top (note: when using a ceramic cooktop – side or rear connection only). All outlets are located close to each other – see photo.

Right-hand and left-hand versions

The stove is available in right-hand or left-hand versions depending on the chimney outlet position (front view).

• Right-hand version – all three flue outlets are located in the right corner, and the oven is on the right side of the stove.
• Left-hand version – all three flue outlets are located in the left corner, and the oven is on the left side of the stove.

Mandatory connection to a heating system

Stoves with a water heat exchanger must not be operated without being connected to a heating system!

Improved combustion thanks to secondary air supply

The stove is equipped with a secondary air supply that supports the combustion process.

Installation in kitchen furniture

The stove can be integrated into kitchen cabinetry using cooling panels. If wall cabinets are installed above the stove, they must be protected from heat and steam, for example by installing a range hood or another insulating element. Failure to do so may result in damage.

Technical inspection statement

This appliance is not classified under "emission classes", but due to its built-in water heat exchanger and output exceeding 10 kW, it is subject to mandatory regular technical inspections in accordance with applicable regulations (inspection every 36 months).

Dimensions:

Technical parameters